DUE TO A HUGE INCREASE IN ORDERS - PLEASE EXPECT AT LEAST 10 DAYS BEFORE YOUR ORDER SHIPS, YOU WILL RECEIVE A TRACKING NUMBER ONCE WE GET YOUR ORDER OUT THE DOOR.
From Fabrique Nationale Herstal (FNH), the SS192 recently replaced the T194 training round. The SS192 ammo uses the 28 grain copper-jacketed hollow point (HP) bullet, but at a slightly higher velocity. Boxer primed and reloadable.
The 5.7 x 28 mm cartridge was designed for pistols,
submachine guns, personal defense weapons and carbines. It was developed by Fabrique Nationale
Herstal (FN Herstal), Belgium and primarily marketed to European militaries for
use by vehicle crewmen, artillery personnel and combat engineers and as a
military and law enforcement round that has more effective performance against
modern body armor when compared with traditional pistol caliber ammunition. The ammo for the civilian market WILL NOT
penetrate Level IIA and Level IIIA Kevlar, Kevlar 129 or Spectra vests,
contrary to popular myth put originated by misguided politicians and gun
control advocates trying to advance their agenda. Ballistically, the 5.7 round is very similar to the .22 WMR (Winchester
Magnum Rimfire) round.
The
5.7x28mm rounds are bottle-necked cartridges with .224 inch (5.7 mm) bullets
and come in several versions. 5.7 ammunition is characterized by high muzzle velocity
and low recoil, and were designed to be more effective against modern body
armor when used in pistols, submachine guns, or carbines.
The following is
a list of ammunition (both current and
discontinued) manufactured for the 5.7 x 28mm caliber. The civilan rounds are listed first.
The SS195LF (LF denotes lead-free) cartridge features a lead-free primer,
and lead-free bullet with similar ballistics to the SS192 round. It features a .224 inch (5.7 mm, same
diameter as .223 Remington) 28-grain (1.77 g) copper-jacketed, aluminum-core
bullet. The SS195LF cartridge may be
identified by the unmarked, hollow void at the tip and the silver-colored
lead-free primer. The silver-colored primer is the distinguishing feature from
brass-colored primer of the now-discontinued SS190 round. SS195LF is one of only two types of
ammunition currently available to civilians.
Note: Some PS90 operators may experience intermittent problems with
SS195LF lot FNB06C971-016.
Specifications:
Bullet Type: JHP Lead Free
Length: 40.5mm (1.6 in)
Weight of Round: 6.15 g (95 gr.)
Weight of Projectile: 1.8 g (28 gr.)
Muzzle Velocity: P90 (2132 fps) - Five-seveN (1890 fps)
Muzzle Energy: P90 (282 ft-lbs) –
Five-seveN (222 ft-lbs)
The SS197SR is manufactured by Fiocchi under contract for FN Herstal. The SS197 cartridge uses the same 40-grain (2.6 g) .224 inch (5.7 mm) Hornady V-Max projectile as the SS196SR, but it is loaded for a slightly higher muzzle velocity. The bullets have a blue-colored polycarbonate tip. The SS197SR boxes can be distinguished by their packaging with modern FN blue and black labels. With the discontinuation of the SS196 round, SS197SR is now the one of the last two loads available to civilians.
Specifications:
Function: Sporting Round
Bullet Type: V-Max Ballistic Tip
Tip Color: Blue
Length: 40.5mm (1.6 in)
Weight of Round: 105 gr.
Weight of Projectile: 40 gr.
The discontinued SS196SR cartridge was replaced with SS197SR. Civilians
can still purchase remaining lots of SS196SR. The SS196SR cartridge features a
40-grain (2.6 g), .224 inch (5.7 mm) diameter Hornady V-Max bullet. The polycarbonate tip in the V-Max bullet
enhances expansion of the bullet. The red colored tip differentiates the
SS196SR from the blue colored tip of SS197SR.
Specifications:
Function: Sporting Round
Bullet Type: V-Max Ballistic Tip
Tip Color: Red
Length: 40.5mm (1.6 in)
Weight of Round: 105 gr.
Weight of Projectile: 40 gr.
Muzzle Velocity: Five-seveN (1650 fps)
Muzzle Energy: Five-seveN (242 ft-lbs)
The SS192 round features a copper-jacketed hollow point (HP) bullet. SS192
ammunition uses a 28-grain (1.8 g) unmarked hollow tip, with an aluminum core.
SS192 can be differentiated from SS195LF (lead-free; see below) by the
brass-colored primer. Production of this round has been discontinued, and it
has been replaced by SS195LF.
The SS90 ball is an early prototype round. It used a
lightweight 23-grain (1.5 g) full metal jacket bullet with a polymer core.
Abandoned in 1994 in favor of the heavier SS190 projectile used in the SS190
Duty Round, which has greater potential for accuracy, penetration and is
shorter and thus easier to fit in FN's Five-seveN pistol.
The SS190 AP ball FMJ is designated as Armor
Piercing (AP) ammunition, designed to penetrate body armor. Its sale to civilians is restricted and BATF
mandates that FN stores the ammunition in a bonded warehouse and releases only
upon sale to law-enforcement or military purchase order. The SS190 bullet has a
steel penetrator and an aluminum core. It is interesting to note that the SS109
FMJ bullet is essentially of the same design, except it uses a lead core with a
steel penetrator. The SS109 is frequently found in civilian-legal M855 loads
sold as surplus or contract-overrun ammunition. FN Herstal has stated that the
SS190 round will easily penetrate protections that stop normal pistol rounds,
but will not penetrate protections that stop the 5.56 x 45 mm NATO round such
as Level IIIA armor. The SS190 has demonstrated varying penetration depths of
about 10 to 13 inches in gelatin testing by various agencies. The Royal
Canadian Mounted Police Academy forensics laboratory tested SS190 fired out of
a P90 into 10% ordnance gelatin, 10% gelatin covered with heavy clothing, and
10% gelatin covered with Level II soft armor. The average penetration depth in
all test events was approximately 10.4 inches; the temporal wound cavity did
not exceed 3.75 inches. Testing of the P90 done by Dr. Gary K. Roberts, DDS
showed an average of 12 inches penetration in 10% ballistic gelatin. Houston,
TX SWAT has also done testing with similar results. Many have asserted that
these figures are not deep enough, as the current FBI minimum penetration depth
is 12 inches in 10% ballistic gelatin.
The standard maintained by ATF is that the round is designed to fire
from a pistol and civilian sales would be contrary to existing bans on armor
piercing handgun ammunition.
Specifications:
Function: service ball round
Bullet Type: FMJ
Tip Color: none
Weight of Projectile: 31 gr.
Muzzle Velocity: 2133 fps
Muzzle Energy: 313 ft-lbs
The SS191 Tracer round contains combustible chemicals
packed in the rear of the projectile that is ignited by the burning propellant
of the fired round and creates a trail (or trace) visible up to 200 meters. The SS191's ballistics are almost identical
to those of the SS190. SS191 tracer
ammunition has a painted red tip. It was previously designated "L191". Its sale to civilians is restricted.
Specifications:
Function: Tracer
Bullet Type: Ball
Tracer
Tip Color: Red
Weight of Projectile: 31 gr.
Muzzle Velocity: 2133 fps
Muzzle Energy: 313
ft-lbs
The SS193 cartridge features a 55-grain (3.6 g) Sierra Game
King FMJBT (Full Metal Jacket Boat Tail) projectile. The SS193 was designed
with low muzzle velocity, specifically to remain below the speed of sound to eliminates
the distinctive "crack" created by supersonic rounds when used in
conjunction with the P90 Gemtech sound suppressor. The SS193 suffers from
greatly reduced penetration and range, but benefits from slightly lower recoil.
SS193 subsonic
ammunition is
identified by a painted white bullet tip. It was previously designated "SB193." Its sale to civilians is restricted.
Specifications:
Function: Subsonic Round
Bullet Type: FMJBT
Tip Color: White
Weight of Projectile: 55 gr.
Muzzle Velocity: 984 fps
Muzzle Energy: 118 ft-lbs
The T194 training round is an early version of the SS192. Visually, it is the same as the SS192 but has a
green tip and silver-colored primer. The bullet weight/velocity of the T194 are
identical to the SS192 and the newer SS195. The T194 round was discontinued in
2002.
For more
information on FN products, please visit the FN
Herstal or FN USA websites.