Corbon Ammunition
Posted: Tue Apr 26, 2005 12:10 am
I recently purchased two 20-round boxes of Corbon ammo. The 1st box was 9mm Luger+P 115 grain JHP and the 2nd was 32 Auto 60 grain JHP.
I loaded the 9mm +P JHP into a CZ75B Military and the 32 Auto JHP into a Walther PP 32 cal. In both pistols, I experienced a malfunction - failure to extract not having even fired a round. Here's the sequence:
1. inserted mag - okay;
2. racked the slide to chamber a round - okay;
3. removed mag - okay;
4. racked slide to extract / eject round in chamber - problem. Both of the Corbon JHP rounds - 9mm and the 32 Auto - were stuck in battery to the point that, only after several attempts and lots of force, was I able to finally extract / eject the round.
I then went back and loaded Federal Premium Hydrashok JHPs into both of the weapons, went through the same sequence (above) and had no problem extracting / ejecting the rounds in battery.
Has anybody experienced a similar malfunction with Corbon ammo?
Thanks.
I loaded the 9mm +P JHP into a CZ75B Military and the 32 Auto JHP into a Walther PP 32 cal. In both pistols, I experienced a malfunction - failure to extract not having even fired a round. Here's the sequence:
1. inserted mag - okay;
2. racked the slide to chamber a round - okay;
3. removed mag - okay;
4. racked slide to extract / eject round in chamber - problem. Both of the Corbon JHP rounds - 9mm and the 32 Auto - were stuck in battery to the point that, only after several attempts and lots of force, was I able to finally extract / eject the round.
I then went back and loaded Federal Premium Hydrashok JHPs into both of the weapons, went through the same sequence (above) and had no problem extracting / ejecting the rounds in battery.
Has anybody experienced a similar malfunction with Corbon ammo?
Thanks.