| |
GENERAL WORK
Clean, lube and inspect |
|
|
|
Bolt, pump, single shot |
$24.95 |
|
Lever action, auto |
$24.95 |
|
Pistols |
$24.95 |
|
Revolvers, S/A |
$24.95 |
|
Revolvers, D/A |
$24.95 |
|
Add $5.00 for Savage M99, Sauer shotguns,
Winchester M97, LC Smith Shotguns. |
|
Refinish Wood Stock, |
Oil finish |
$100-$150 |
Same, |
Polyurethane |
$75.00 |
Recut checkering |
|
$40.00 - $80.00 |
Drill and tap holes |
Each |
$15.00 |
Cut dovetail slots |
|
$35.00 |
Install recoil pad |
|
$30.00 |
Sight in gun |
(plus cost of ammo and range) |
$40.00 |
Chamber and install barrel |
M1 |
$150.00 |
Metal Finishing
Bead blast (no polishing) |
$50.00 |
Polish, 400 grit (will leave some deep pits and gouges) |
$75.00 |
Polish, 600 grit (remove all but the deepest pits) |
$125.00 |
Finest finish, 800 grit (all pits removed, all edges sharp,
lettering and holes left sharp) |
$175.00 |
Belgian Blue |
$75.00 |
Hot salt dip |
$25.00 |
NOTES:
| Sears and notches will not be recut unless they are worn to unsafe
levels due to liability factors. |
| For the same reason as stated above, any factory installed
safety devices will not be removed or any safety features rendered inoperative. |
| Three Certified Glock Armorers on site. |
| Bluing and parkerizing services. |
|